NOTE: If you ordered a Done-For-You Setup. You can skip this step.

The Follow-Up Series / Campaign Sharing Codes are part of step 3 in your quick-start checklist; “Set Up Your Auto-Responder (Step-By-Step Instructions)”.

The Follow-Up Series / Campaign Sharing Codes can be found in your “FULL written setup instructions” found below your quick-start checklist.

To locate them, make sure you’ve completed steps 1 and 2 first, then click the link below your Quickstart Checklist that says: “Access the FULL written setup instructions here” (see below)

Clicking this will open a new tab with a PDF Document called:

12 Minute Affiliate System 

Step-By-Step Written Setup Instructions

Scroll down and look for “STEP #3 Set Up Your Auto-Responder” and click it. This will take you to the correct section/page. Again, make sure you’ve completed steps 1 and 2 of the quickstart checklist BEFORE you go here. (see below)

Once you are in the “STEP #3 Set Up Your Autoresponder” section, (the page will look similar to this). 

You will need to scroll down until you see THIS BOX:

NOTE: The awlist codes are NOT blurred out in the ‘Written Setup Instructions’

You will need to copy each code beginning with “awlist” and ending with -$F

IMPORTANT NOTE: Be sure NOT to copy any spaces before or after the sharing codes.

If you are still having trouble:

1. Click on the “HELP” bubble in the lower right-hand corner of your screen.
2. Type in the word "Contact", then hit Enter.
3. Click on the blue button in the lower right hand corner that says "Contact Us"
4. Enter your details and your question and click "Send"

You can also contact us by emailing help@easysupportnow.com or calling +1 678 894 1982 (M-F 10AM to 6PM Eastern Time)